The STREETLIGHT.VISION SEGMENT CONTROLLER is a programmable controller that is customized by Streetlight.Vision to control and monitor up to 150 Streetlight Controllers over a powerline network.

The SEGMENT CONTROLLER is installed in the Streetlight Cabinet (or feeder pillar). It communicates with the Streetlight Controllers over powerline using the ISO 14908-1 and 14908-2 communication standards (also called LonWorks). It sends SWITCH ON, OFF and DIMMING commands and polls all available data from the Streetlight Controllers : failures, alarms, voltage, current, power, energy number of burning hours, ballast temperature, etc...

The STREETLIGHT.VISION SEGMENT CONTROLLER is delivered with the STREETLIGHT.VISION DESIGN configuration software and the usage license for the STREETLIGHT.VISION M2M DATA COLLECT and the STREETLIGHT.VISION WEB PORTAL software.

Key features Realtime Operating System Realtime clock that get synchronized automatically Astronomical clock to determine dawn and dusk from GPS positioning Easy programming of the ON, OFF and DIMMING commands at fixed time or time related to dawn and/or dusk. Supports up to 150 LonWorks-enabled Streetlight Controllers Sends data records on alarm, once a day or on event Upstream Communication through a GPRS modem, Wi-Fi network, ADSL network or Radio modem Records up to several months of historical data in case of non-communication Web Software for the configuration of the Segment Controller and the Test of each Streetlight Controller in real-time Controls any MODBUS device installed in the cabinet, through a RS485 bus